SUNLU and INSLOGIC Launch FilaDC i10 Filament Dehumidifying Cabinet for Long-Term Filament Storage
SUNLU and INSLOGIC Launch FilaDC i10 Filament Dehumidifying Cabinet for Long-Term Filament Storage
PR Newswire
FRANKFURT, Germany, Sept. 10, 2026
The new FilaDC i10 combines active dehumidification, 10-spool storage, low energy consumption and quiet operation to help maintain a stable, low-humidity environment for filament storage.
FRANKFURT, Germany, Sept. 10, 2026 /PRNewswire/ -- SUNLU and INSLOGIC are introducing the FilaDC i10 Filament Dehumidifying Cabinet, a new long-term storage solution designed to help 3D printing users protect filament from moisture between prints.
Physical Adsorption + Smart Cycling
The i10 uses a molecular sieve to adsorb moisture from the air inside the cabinet. Its smart cycling system releases collected moisture and restores adsorption capacity automatically, providing continuous humidity control between 10% and 45% RH.
In testing, PETG stored in the i10 decreased from 0.34% to 0.21% moisture content after 96 hours, while PETG exposed to open air increased from 0.35% to 0.39% over the same period.
This creates a stable, low-humidity environment for long-term filament storage without relying on continuous high-temperature drying.
10-Spool Storage, Stackable Design
The i10 stores up to 10 × 1 kg filament spools and supports spool sizes from 0.25 kg to 5 kg.
Multiple i10 units can be stacked vertically to save floor space, with stacking up to three units recommended.
A sealing gasket and three strong magnets help keep the cabinet tightly closed and maintain a stable storage environment.
Built for Long-Term Storage
The i10 consumes approximately 0.23 kWh/24h* and operates below 30 dB, making it suitable for continuous use in homes, studios, workshops, and print rooms.
Its integrated design requires no complicated installation. Users can simply set it up, load the filament, and let it maintain the storage environment.
*Tested at 25°C and 60% RH in an empty chamber. Actual results may vary.
Multiple Safety Protections
For long-term operation, the i10 combines hardware temperature protection with intelligent software monitoring. If excessive temperature is detected, the system provides a real-time warning.
Beyond filament, the i10 can also provide low-humidity storage for other moisture-sensitive items, such as camera lenses, electronic components, tools, and collectibles.
Availability
The SUNLU × INSLOGIC FilaDC i10 will be available for pre-order beginning:
September 15, 2026, at 7:00 AM UTC
Pre-order: [https://bit.ly/4gGV5lb]
About SUNLU
Founded in Zhuhai in 2013, SUNLU is a global 3D printing brand specializing in filaments, resins, and accessories. With 270+ production lines, 25 million+ products sold, and 530+ intellectual property rights, SUNLU continues to advance 3D printing through product innovation, quality, and accessibility.
SOURCE SUNLU
The articles, information, and content displayed on this webpage may include materials prepared and provided by third parties. Such third-party content is offered for informational purposes only and is not endorsed, reviewed, or verified by Morningstar.
Morningstar makes no representations or warranties regarding the accuracy, completeness, timeliness, or reliability of any third-party content displayed on this site. The views and opinions expressed in third-party content are those of the respective authors and do not necessarily reflect the views of Morningstar, its affiliates, or employees.
Morningstar is not responsible for any errors, omissions, or delays in this content, nor for any actions taken in reliance thereon. Users are advised to exercise their own judgment and seek independent financial advice before making any decisions based on such content. The third-party providers of this content are not affiliated with Morningstar, and their inclusion on this site does not imply any form of partnership, agency, or endorsement.
Popular
4 Stocks to Buy for the Long-Term While They’re Still Undervalued
Why This Vanguard ETF Is One of the Best
2 Undervalued Stocks to Buy With Long-Term Growth Ahead
The Market May Be Too Pessimistic About This 4-Star Dividend Stock
United States